BL109-10T IMD沖切機-深圳市博菱機械設備有限公司

更新：2014-02-28 23:32:32 點擊：

介紹

109系列快速熱壓成型機

型號 Model		單位 Unit	BL109-5T	BL109-10T	BL109-30T	BL109-50T	BL109-60T
公稱 壓力 Nominal force Out put		KN	50	100	300	500	600
液體最大工作壓力 Maximum hydraulic working pressure		MPa	7	20	20	20	20
回程力 Back storke force		KN	3	1.9	3.2	4.2	5.2
機架臺面距地面高度 Height of tale above floor		mm	780	780	780	780	780
最大開 口距離 Biggest operational height		mm	300	400	400	500	500
壓塊最大行程 Maximum stroke of the ram		mm	200	300	300	400	400
工作臺有效面積 Dimensions of table	左右 Left-right	mm	450	600	800	1000	1200
工作臺有效面積 Dimensions of table	前后 Front-back	mm	300	450	600	600	600
滑塊壓頭速度 Speed of slide	下行速度 Speed of Down	mm/s	≥140	≥188	≥188	≥210	≥210
	工作速度 Work of speed	mm/s	≥140	≥30	≥19	≥18	≥18
	回程速度 Speed of etuming	mm	≥140	≥158	≥130	≥144	≥144
壓塊主幾輪廓長X寬X高 Overal dimensions of the machine		KW	700X1100X1850	900X1300X1850	1100X1700X2200	1300X1700X2300	1500X1700X2400
總功率 Motor Power		KW	2.2	2.2	3.7	3.7	3.7

109系列IMD/IML沖切機

109 Series IMD/IML3D punching machine

3D沖切機簡介 3D die cutting machine

結構分為外罩三板四柱封閉式和精簡三板四柱式。
安全設計周全，雙手操作并設有緊急按鈕同時采用高靈敏度對射式光柵安全保護系統，光柵故障則機器無動作，確保工作安全。
三板四柱結構平行精度高，3D沖切有效保護模具壽命及提高產品的穩定性。
四柱采用高強度合金鋼制作，表面鍍硬，耐磨性好；
設備機身下方裝有腳杯，方便校正機身與地面的水平。

The structure is divided into outer garment san ban enclosed four columns and concise three boards four-post type.
Security design, operation and is equipped with emergency button using high sensitivity at the same time. Correlation type safety protection system of grating fault machine no action, ensure that the work security.
San ban four column structure with high precision 3 d cutting die life and improve the effective protection. The stability of the product.
Four column made of high strength alloy steel surface hard chromium plating wear ability;
The equipment with the left foot cups, convenient calibration the fuselage level with the ground.

適用范圍 Scope of Application:：

本系列液壓機廣泛用于IMD/IML片材3D模沖切,五金,塑膠的邊料沖切,各種IMD工藝的家電面板，手機套, 游戲手柄 , 智能鎖等各類電子電器裝飾面蓋的片材沖切; 可安裝刀模,設有機械限位,是沖切產品的最佳設備之選

scope of application

This series of hydraulic machine are widely used in IMD/IML sheet 3D model punching, hardware, plastic side material punching, home appliance panels of various IMD processes, mobile phone cases, game handles, smart locks and the sheet punching of the electronic appliances covers; the knife mold can be installed, and there is a mechanical limit, which is the best equipment for punching products